MPPT Solar regulator 12/24V 40amp
Model Number |
SL-40 |
Application |
Solar System Controller |
Rated Voltage |
12V 24V Auto-Detection |
Maximum Current |
40amp |
Load current |
15A, can up to 40A |
Max. PV open circuit array voltage |
55VDC |
Load output port |
Both AC and DC Load output |
Indicator |
LED displays the charge status |
efficiency |
higher than 99.5% |
Battery |
Capable of selecting various charging mode for all types batteries |
PWM power control system |
By highly efficient and reliable power MOSFET transistors |
RJ11 or RS232 Port |
connect to PC for data logging and system monitorin |
Protection against |
voltage transients,over heat,over current,reverse battery&reverse PV |
material of the casing |
metal |
Model Number |
SL-40 |
Application |
Solar System Controller |
Rated Voltage |
12V 24V Auto-Detection |
Maximum Current |
40amp |
Load current |
15A, can up to 40A |
Max. PV open circuit array voltage |
55VDC |
Load output port |
Both AC and DC Load output |
Indicator |
LED displays the charge status |
efficiency |
higher than 99.5% |
Battery |
Capable of selecting various charging mode for all types batteries |
PWM power control system |
By highly efficient and reliable power MOSFET transistors |
RJ11 or RS232 Port |
connect to PC for data logging and system monitorin |
Protection against |
voltage transients,over heat,over current,reverse battery&reverse PV |
material of the casing |
metal |
MPPT Solar regulator 12/24V 40amp
Solar Charge Controller with Advanced MPPT Technology
Adopting advanced MPPT technology, SolarMate photovoltaic charge controller is the key component in off-grid or stand alone solar power generation
system. 12V/24V Solar Charge Controller can track the maximum power point and transfer the energy to various types of batteries. The build-in MPPT microprocessor enables
the controller to increase energy transfer efficiency up to 30% compared to traditional charge controllers. Easy installation and capable of paralleled
connection, 12V/24V Solar Charge Controller is perfect solution for home to large solar system applications.
. High converting efficiency up to 97% for minimizing energy loss
. Build-in MPPT tracker for optimizing the power transformation
. Reversed current protection with fuse
. Automatic battery temperature compensation for long-term reliability
. Capable of selecting different charging mode for various type of batteries
. Capable of connecting additional DC load for wider applications
. Three stage charge control system (bulk, absorption, and float mode) with temperature compensation
. LED indicators display charge status in real time
. Pulse Width Modulation (PWM) topologycombined with a multi-stage charge control algorithm leads
. superior charging and enhanced battery performance
SolarMate Solar Charge Controller Specification
MODEL
|
SL-40A
|
Rated Voltage
|
12/24 VDC 12 Auto-Detection
|
Rated charge current
|
40A
|
Load current
|
15A, can up to 40A
|
Input voltage range
|
15-55VDC
|
Max. PV open circuit array voltage
|
55VDC
|
Typical idle consumption
|
At idle < 10mA
|
Overload protection (DC load)
|
2.0*Inom>5s
1.5*Inom >20s
1.25*Inom temperature controlled
|
Bulk charge
|
14.6V(default)
|
29.2V(default)
|
Floating charge
|
13.4V(default)
|
26.8V(default)
|
Equalization charge
|
14.0V(default)
|
28.0V(default)
|
Over charge disconnection
|
14.8V
|
29.6V
|
Over charge recovery
|
13.6V
|
27.2V
|
Over discharge disconnection
|
10.8 V (default)
|
21.6V(default)
|
Over discharge reconnection
|
12.3V
|
24.6V
|
Temperature compensation
|
-13.2mV/
|
-26.4mV/
|
Lead acid battery settings
|
Adjustable
|
NiCad battery settings
|
Adjustable
|
Load control mode
|
1. Low Voltage Reconnect (LVR): Adjustable
2. Low Voltage Disconnect (LVD): Automatic disconnection
3. Reconnection: Includes warning flash before disconnect and reconnection
|
Low voltage reconnect
|
12.0-14.0 Vdc
|
24.0-28.0 Vdc
|
Low voltage disconnect
|
10.5-12.5 Vdc
|
21.0-25.0 Vdc
|
Ambient temperature
|
0-40(full load) 4060(de-rating)
|
Altitude
|
Operating 5000 m, Non-Operating 16000 m
|
Protection class
|
IP21
|
Battery temperature sensor
|
BTS - optional remote battery temperature sensor for increased charging precision
|
Terminal size (fine/single wire)
|
#8 AWG
|
Cooling
Size :202 x 140 x 66 mm weight:2KG
|
Naturall Cooling
|